11th Gen Ford F150 OEM Interior Upgrade Guide (2004 - 2008)
Step 1: ID What You Have
To get you the right set of seats, we have to know what we're trying to match. Identifying the exact interior you have helps us make sure we get you the right thing the first time!
Continue reading below to begin your DIY swap, or give us a call for a full-service experience!
Step 2: Learn What's Out There
Learn what seats you can install in your 11th Gen F150. The front bucket seats, center jumpseat-console, and rear seats can all be handled separately!
We want to make sure you get the best bang for your buck by giving you all your options, allowing you to make an informed decision.
Step 3: Get New Seats
Check out our full selection of New & Used F150 Seats. All of our seats ship fully assembled, ready for a quick and easy installation in your vehicle.
If we don't have what you need, simply fill out our contact form and we will be in touch!
11th Gen Ford F-150 Interior Options (2004 - 2008)
Applicable Vehicles
- 2004 Ford F-150
- 2005 Ford F-150
- 2006 Ford F-150
- 2007 Ford F-150
- 2008 Ford F-150
Available Colors & Materials
- Pebble Tan Vinyl
- Medium Flint Vinyl
- Pebble Tan Premium Cloth
- Dark Flint Premium Cloth
- Medium Flint Sport Leather w/ Perforations
- Pebble Tan Cloth
- Medium Flint Cloth
- Medium Flint Sport Cloth
- Medium Flint Premum Cloth
- Medium Flint Sport Leather
- Black Sport Leather w/ Perforations
- Black/Medium Flint Two Tone Cloth
- Black Sport Cloth (2006/2008)
- Tan Leather
- Black Leather
- Tan Premium Cloth (2006/2008)
- Medium Flint Premium Cloth (2006/2008)
- Medium Flint/Dark Flint (2006/2008)
- Black/Red Sport Cloth (F150 Sport)
- Black/Dusted Copper Leather w/ Harley Davidson Badging (2008 F-150 Harley)
- Black Leather w/ Harley Davidson Badging (2004 - 2008 F-150 Harley, not pictured)
- Castano Leather (2004 - 2008 F-150 King Ranch)
- Black/Red Sport Leather (F-150 Sport, not pictured)
- Light Parchment Leather (2004 F-150 Only)
Available Configurations
Front Row
- XL: 40-20-40 Split Bench Seat (Seats three) w/o Armrest Storage
- XLT: 40-20-40 Split Bench Seat (Seats three) w/ Armrest Storage
- XLT: 40-Console-40 Bucket Seats
- Lariat: 40-Console-40 Bucket Seats
Back Row
- 60/40 With Folding Cushions (SuperCab)
- 60/40 With Folding Cushions and Armrest (SuperCrew)
Integrated Seatbelts
These were standard on all standard "Regular" and extneded "Supercab" trucks - if you have these seats yo umust be asure to replace them with seats that also have integrated seatbelts!
2004 Ford F-150 Heritage
The 2004 F-150 Heritage was a carry-over from the 2003 model year. It uses the same seats as the 10th gen Ford F-150. Please see our guide 10th Gen F-150 Interior Upgrade Guide.
11th Gen Ford F150 OEM Interior Upgrades
Center Console and Jump Seat Swaps
Mounting your Console
The holes are the same for the center console and jumpseat - this swap is very direct and only takes a few minutes. Simply uncover the floor bolts by removing the cupholder or cushion, then undo all mounting bolts. Remove and replace, and you're all done!
Seatbelt Considerations
- Regular Cab Trucks use a three-point seatbelt that comes down from the rear wall, fastening onto the center seat.
- Supercab and SuperCrew Trucks were equipped with a lap belt for these years.
Adding Power Seats
Mounting The Seats
The holes are the same. Simply remove your old seats by undoing the four mounting bolts and unplugging the wiring harness. Install your new seats, plug them in and you're good to go!
Wiring Considerations
The floor plugs didn't change significantly during this generation, but adding heated seats or memory seats is technical and time consuming. Adding power seats is simple - they only need 12 volts power and ground. XLT models are typically pre-wired for power seats, allowing a plug-and-play install.
XL models are typically not pre-wired for power seats. If this is your situation, simply run 12 volts power and ground to the seat harness.
0 comments