4th Gen Dodge Ram Seat & Console Upgrade Guide ('09 - '18)

Step 1: ID What You Have

To get you the right set of seats, we have to know what we're trying to match. Identifying the exact interior you have helps us make sure we get you the right thing the first time!

Continue reading below to begin your DIY swap, or give us a call for a full-service experience!

Step 2: Learn What's Out There

Learn what seats you can install in your 4th Gen Ram. The front bucket seats, center jumpseat-console, and rear seats can all be handled separately!

We want to make sure you get the best bang for your buck by giving you all your options, allowing you to make an informed decision.

Step 3: Get New Seats

Check out our full selection of New & Used Ram Truck Seats. All of our seats ship fully assembled, ready for a quick and easy installation in your vehicle.

If we don't have what you need, simply fill out our contact form and we will be in touch!

Seating Options for Gen 4 Ram (2009 - 2012)

Applicable vehicles

2009 - 2012 Ram 1500
2010 - 2012 Ram 2500
2010 - 2012 Ram 3500

Low-Trim Options

These seats were manually adjustable.

A. Vinyl. Diesel (Tradesman, Express)

B. Sedoso/Alloy Cloth. Diesel Gray & Medium Graystone (ST, Tradesman, Express)

C. Bristol Vinyl. Dark Slate Gray & Medium Graystone (ST, Tradesman, Express)

Mid-Trim Options

These trucks typically had a power driver seat and a manual passenger seat.

D. Racine/Dallas Cloth. Dark Slate Gray & Medium Graystone (ST, Tradesman, Express, SLT, Outdoorsman, Big Horn)

E. Racine/Dallas Cloth. Light Pebble Beige. (SLT, Outdoorsman, Big Horn)

F. Cloth/Caprice Vinyl, Dark Slate Gray (Sport)

G. Bristol Vinyl. Dark Slate Gray. (Sport)

High-Trim Options

These seats were fully power adjustable with heating and ventilation.

H. Bristol Leather. Light Pebble Beige (Laramie)

I. Bristol Leather. Dark Slate Gray (Laramie)

J. Natura Plus Leather, Russet (Longhorn)

K. Natura Plus Leather, Bark Brown (Longhorn)

Shop now

Seating Options for Gen 4 Ram (2013 - 2018)

Applicable vehicles

2013 - 2018 Ram 1500
2013 - 2018 Ram 2500
2013 - 2018 Ram 3500

Low-Trim Options

These seats were manually adjustable.

A. Vinyl, Diesel Gray (Tradesman, Express)

B. Sedoso/Alloy Cloth, Diesel Gray (Tradesman, Express, SLT, HFE, Power Wagon)

C.Sedoso/Alloy Cloth, Canyon Brown (SLT, Power Wagon)

Mid-Trim Options

These trucks typically had a power driver seat and a manual passenger seat.

D. Sedoso/Carbide Cloth, Diesel Gray (Big Horn, Lone Star, Outdoorsman, Power Wagon)

E. Sedoso/Carbide Cloth, Bark Brown (Big Horn, Lone Star, Outdoorman, Power Wagon)

F. Bristol Vinyl/Sport Cloth, Black (1500 Sport)

High-Trim Options

These seats were fully power adjustable with heating and ventilation.

G. Bristol Leather, Light Frost Beige (Laramie)

H. Bristol Leather, Black (Laramie)

I. Natura Leather, Cattle Tan (Laramie Longhorn)

J. Natura Leather, Canyon Brown (Laramie Longhorn)

K. Natura Leather, with laser etching, Canyon Brown. (Laramie Longhorn)

L. Natura Leather, with Gray Stone Accent Stitching, Black. (Laramie Limited)

Shop now

4th Gen Ram Suggested Interior Upgrades

4th Gen Ram Power Driver Seat Conversions

Love your work truck but need some more adjustability?

Convert your driver seat to power and pay hundreds less than replacing your entire front row.

Parts List

You'll need all of the following from the donor vehicle.

Driver Seat Track
Driver Seat Leanback
Driver Seat Cushion Harness
Driver Seat Leanback Harness
Driver Seat Floor Connector pigtail
Lumbar Switch

We offer all of these components bundled together, tested, functional, and ready for installation.

Installation Process

The complete installation process for this conversion takes around 60 minutes.

If you don't have power seats you may need to run an additional 12 volt circuit underneath your seats to supply power to your new seats.

4th Gen Ram Jumpseat to Console Conversion

If your center seat stays folded down 24/7 then you may as well treat yourself to a far more functional console. These are a direct swap, but you must also replace the bezel that surrounds your radio. We sell the console by itself, alongside a complete conversion kit when available. These are available with "square" trim (2009 - 2013 style), or "round" trim (2013 - 2018 style).

Parts List

OEM Flow-through Console
Rubber Insert Set
Console Side Trim "Wings"
Console Mounting Brackets
Miscellaneous Hardware

Removing the old console:

The old jumpseat needs to be taken out before the new one can be installed. Remove the female and male seatbelts along with the jumpseat, and the jumpseat mounting brackets.

Remove the radio bezel, along with the trim underneath it.

Modifications

If your truck has a floor shifter for four-wheel drive, you might need to make a small cut in the new console for clearance.

Installation

After replacing the radio bezel, the new console bolts right in, making it a relatively straightforward "take the old one out, put the new one in" process. Mount the floor brackets first, and then mount the console to the floor brackets.

Shop now

4th Gen Ram Console to Jumpseat Conversion

Needing seating for three? This is a direct swap, though you'll want to close-off the dashboard lower panel after removing the center console. The radio bezel will also need replaced for a flush fitment with no gaps. In addition to the seat, you will also need the four mounting brackets, seatbelt, and accompanying hardware.

Parts List

OEM Ram Center Jumpseat
Four
Console Side Trim "Wings"
Console Jumpseat Mounting Brackets
Miscellaneous Hardware

Removing the old console:

The old console needs to be taken out before the new one can be installed. Remove the radio bezel first, and work your way down. Once that's done, remove the console by undoing the four bolts on the sides, and then remove the console mounting brackets from the floor.