Ram Heavy Duty Truck Seat & Console Upgrade Guide ('19 - '25)
Step 1: ID What You Have
To get you the right set of seats, we have to know what we're trying to match. Identifying the exact interior you have helps us make sure we get you the right thing the first time!
Continue reading below to begin your DIY swap, or give us a call for a full-service experience!
Step 2: Learn What's Out There
Learn what seats you can install in your Ram Heavy Duty. The front bucket seats, center jumpseat-console, and rear seats can all be handled separately!
We want to make sure you get the best bang for your buck by giving you all your options, allowing you to make an informed decision.
Step 3: Get New Seats
Check out our full selection of New & Used Ram Truck Seats. All of our seats ship fully assembled, ready for a quick and easy installation in your vehicle.
If we don't have what you need, simply fill out our contact form and we will be in touch!
Ram Heavy Duty Interior Options
Applicable vehicles
- 2019 - 2025 Ram 2500
- 2019 - 2025 Ram 3500
- 2019 - 2025 Ram 4500
- 2019 - 2025 Ram 5500
TRADESMAN®
A: Heavy Duty Vinyl, Diesel Gray/Black - Standard
B: Cloth, Black - Available
BIG HORN® / LONE STAR
C: Cloth, Diesel Gray/Black
LARAMIE®
D: Leather-trimmed, Black - Available with Black interior selection
H: Leather-trimmed, Mountain Brown/Light Mountain Brown - Available with Mountain Brown/Light Frost Beige interior selection
REBEL®
I: Vinyl/Cloth, Black - Standard
J: Leather-trimmed, Black - Available
K: Premium leather-trimmed, Black - Included with Rebel Level 2 Equipment Group
LIMITED LONGHORN™
L: Premium Leather, Cattle Tan/Black - Available
M: Premium Leather, Light Mountain Brown/Mountain Brown Premium Leather Inserts - Available
S: Premium Leather with Laser Etching, Light Mountain Brown/New Saddle - Available
LIMITED
N: Premium Leather, Black - Available
O: Premium Leather, Indigo/Sea Salt - Available with Indigo/Sea Salt interior selection
POWER WAGON®
P: Vinyl/Cloth, Black - Standard
Q: Leather-trimmed, Black - Available
R: Premium leather-trimmed, Black - Included with Power Wagon Level 3 Equipment Group
Seat Airbag Options for Ram HD Trucks
2500/3500 Models
These have seat-mounted side-impact airbags that are different from the DS 1500, and DS 1500 Classic Trucks! You MUST USE SEATS FROM A 2500/3500 RAM TO PREVENT AIRBAG CODES. Seats from 4500 & 5500 models DO NOT have airbags in them and they will not work in 2500/3500.
4500/5500 Models
These came from the factory standard without seat-mounted side-impact airbags, though you could option-in.
Ram Heavy Duty Suggested Interior Upgrades
Ram HD Console to Jumpseat Conversion
Needing seating for three? This is a direct swap, though you'll want to close-off the dashboard lower panel after removing the center console. In addition to the seat, you will also need the four mounting brackets, seatbelt, and accompanying hardware.
Parts List
- OEM Ram Center Jumpseat
- Four Mounting Brackets
- Air Vents
- Seatbelts & Hardware
- Dash Trim
- Miscellaneous Hardware
Installation Tips
After replacing the radio bezel, mount the console mounting brackets to the passenger seat and floor, then bolt the jumpseat into the vehicle.
Ram Heavy Duty Jumpseat to Console Conversion
If your center seat stays folded down 24/7 then you may as well treat yourself to a far more functional console. These are a direct swap, but you must also replace a few trim pieces and add some bracketry - all of this is included in our conversion kit when available.
Parts List
- OEM Flow-through Console
- Console Side Trim
- Console Mounting Brackets
- Miscellaneous Hardware
Heavy Duty Ram Truck Power Driver Seat Conversions
Love your work truck but need some more adjustability?
Convert your driver seat to power and pay hundreds less than replacing your entire front row.
Parts List
You'll need all of the following from the donor vehicle.
- Driver Seat Track
- Driver Seat Leanback
- Driver Seat Cushion Harness
- Driver Seat Leanback Harness
- Driver Seat Floor Connector pigtail
- Lumbar Switch
We offer all of these components bundled together, tested, functional, and ready for installation.
Installation Process
The complete installation process for this conversion takes around 60 minutes.
If you don't have power seats you may need to run an additional 12 volt circuit underneath your seats to supply power to your new seats.
Ram HD Rear Seat & Console Missing?
2023 and Newer model year RAM Chassis cab trucks include the Front Center Seat Delete and Rear Seat Delete as standard equipment. If you want a Chassis-Cab that seats more than two people, you have to order it that way from the factory, or complete a full conversion using the parts below.
Parts List
- OEM Ram Center Jumpseat
- Four Mounting Brackets
- Dashboard Trim Pieces
- Lower Console (w/ or w/o shifter trim)
- Seat Console Rear Panel (For Quad/Crew Cab Only)
- Rear Seat w/ Mounting Brackets
- Rear Seatbelts, Male ( x 2)
- Rear Seatbelts, Female ( x 2)
- Male/Female Seatbelt Combo Pack (x 1)
- Miscellaneous Hardware
Installation
Installation is straightforward. All necessary bolts and hardware are included for installation, allowing for a quick easy solution to get your truck back in service.
0 comments